General Settings; Open Loop Settings - Danfoss vlt FC 102 Operating Instructions Manual

®
VLT HVAC Drive Operating Instructions
Illustration 6.6: Step 5: Use the up/down navigation keys to
Analog Outputs
scroll down to i.e. 03-11
Illustration 6.8: Step 7: Use the up/down navigation keys to
select between the different choices. Press [OK].
The Function Setup parameters are grouped in the following way:
Q3-10 Adv. Motor Settings
1-90 Motor Thermal Protection
1-93 Thermistor Source
1-29 Automatic Motor Adaption
14-01 Switching Frequency
4-53 Warning Speed High
Q3-20 Digital Reference
3-02 Minimum reference
3-03 Maximum reference
3-10 Preset reference
5-13 Terminal 29 digital input
5-14 Terminal 32 digital input
5-15 Terminal 33 digital input
. Press [OK].
Q3-1 General Settings
Q3-11 Analog Output Q3-12 Clock Settings
6-50 Terminal 42 Output 0-70 Set date and time
6-51 Terminal 42 Output max. 0-71 Date format
scale
6-52 Terminal 42 Output min. scale 0-72 Time format
0-74 DST/Summertime
0-76 DST/Summertime start
0-77 DST/Summertime end
Q3-2 Open Loop Settings
MG.11.A6.02 - VLT ® is a registered Danfoss trademark
6. How to programme the frequency converter
Illustration 6.7: Step 6: Choose parameter 6-50
Output
. Press [OK].
Q3-13 Display Settings
0-20 Display Line 1.1 Small
0-21 Display Line 1.2 Small
0-22 Display Line 1.3 Small
0-23 Display Line 2 large
0-24 Display Line 3 large
0-37 Display Text 1
0-38 Display Text 2
0-39 Display Text 3
Q3-21 Analog Reference
3-02 Minimum reference
3-03 Maximum reference
6-10 Terminal 53 low voltage
6-11 Terminal 53 high voltage
6-12 Terminal 53 Low Current
6-13 Terminal 53 High Current
6-14 Terminal 53 low ref/feedb. value
6-15 Terminal 53 high ref/feedb. value
Terminal 42
6
71