®
VLT
HVAC Drive Operating Instructions
RFI 1
Par. 14-50
can be used to disconnect the internal RFI capacitiors from the RFI filter to ground. If this is done it will reduce the RFI performance to
A2 level.
1.1.12. Software Version and Approvals: VLT HVAC Drive
This Operating Instructions can be used for all VLT HVAC Drive frequency converters with software version 2.xx.
The software version number can be seen from parameter 15-43.
1.1.13. Disposal Instruction
VLT HVAC Drive
Operating Instructions
Software version: 2.7.x
Equipment containing electrical components must not be disposed of together with domestic waste.
It must be separately collected with electrical and electronic waste according to local and currently valid leg-
islation.
MG.11.A6.02 - VLT
®
is a registered Danfoss trademark
1. Safety
1
7