Display Option Settings; Adjusting Color Matching - Panasonic PT-D12000U Operating Instructions Manual

Display Option settings

MENU
This menu can be used to make a variety of
picture and projector settings.
MENU
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
P IN P
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
ENTER
70 – ENGLISH
▲▼◄►
ENTER
DEFAULT
Press to display the MAIN
MENU screen.
Press to select
"DISPLAY OPTION".
Press to display the
"DISPLAY OPTION" menu.

Adjusting color matching

When multiple sets are used simultaneously, this
projector allows the user to correct the difference of
colors among the sets.
Press ▲▼ to select "COLOR
1.
MATCHING".
DISPLAY OPTION
COLOR MATCHING
LARGE SCREEN CORRECTION
Press ◄► to switch "COLOR
2.
MATCHING".
• The setting will change as follows each time
◄► is pressed.
OFF 3COLORS
MEASURED
• OFF:
Color matching adjustment is not carried out.
• 3COLORS:
It is possible to adjust the 3colors of "RED",
"GREEN" and "BLUE".
• 7COLORS:
It is possible to adjust the 7colors of "RED",
"GREEN", "BLUE", "CYAN", "MAGENTA",
"YELLOW" and "WHITE".
• 709MODE:
Refer to "Adjusting the color matching using a
colorimeter" on the next page for details on this
mode.
• MEASURED:
Refer to "Adjusting the color matching using a
colorimeter" on the next page for details on this
mode.
If "3COLORS" or "7COLORS"
was selected in step 2.
3. Press ENTER.
• The "3COLORS" or "7COLORS" screen will be
displayed.
3COLORS
RED
GREEN
BLUE
AUTO TESTPATTERN
Press ▲▼ to select "RED",
4.
"GREEN" and "BLUE" (if
"7COLORS" was selected,
select "RED", "GREEN",
"BLUE", "CYAN", "MAGENTA",
"YELLOW", and "WHITE").
OFF
OFF
7COLORS
709MODE
ON