Panasonic PT-D12000U Operating Instructions Manual page 33

Connecting the signal to the SD-SDI input module
SD-SDI input module (optional)
ET-MD77SD1 (for 480i/576i)
Note
• If a source with an unstable signal is connected, errors in automatic signal recognition may occur. If this
happens, use the SYSTEM SELECTOR menu to switch the format to the one which matches the signals being
input.
• You can switch the input format mode from the SYSTEM SELECTOR menu. (pp. 58-59)
*1: The LAN terminal present on the optional input module cannot be used with the PT-D12000U/PT-DZ12000U.
Use the LAN terminal that is provided as standard with the projector.
Connecting the signal to the HD/SD-SDI input module
HD/SD-SDI input module (optional)
ET-MD77SD3 (for HD/SD)
Note
• You can switch the input format mode from the SYSTEM SELECTOR menu. (pp. 58-59)
• If a source with an unstable signal is connected, errors in automatic signal recognition may occur. If this
happens, use the SYSTEM SELECTOR menu to switch the format to the one which matches the signals being
input.
• To ensure full imaging performance, use a connecting cable with the specifications of Canare 5CFB or higher, or
of Belden1694A or higher.
(For example: Canare 5CFB, 5CFTX, 7CFB, Belden1694A, etc.)
*1: The LAN terminal present on the optional input module cannot be used with the PT-D12000U/PT-DZ12000U.
Use the LAN terminal that is provided as standard with the projector.
SD-SDI Module
IN
ET-MD77SD1
SD-SDI signal SD-SDI signal output
Professional
Digital VCR
HD/SD-SDI
IN
Module
ET-MD77SD3
HD-SDI or SD-SDI
signal
Professional
Digital VCR
OUT
SERIAL LAN
LAN terminal
(10BASE-T/100BASE-TX)
(active through)
OUT
SERIAL LAN
LAN terminal
(10BASE-T/100BASE-TX)
HD-SDI or SD-SDI
signal output
(active through)
*1
*1
ENGLISH – 33