Changing The Text; Setting The Text; Changing The Security Password - Panasonic PT-D12000U Operating Instructions Manual

Changing the security
password
The password can be changed.
Press ▲▼ to select "SECURITY
1.
PASSWORD CHANGE".
SECURITY PASSWORD
SECURITY PASSWORD CHANGE
DISPLAY SETTING
2. Press ENTER.
• The "SECURITY PASSWORD CHANGE" screen
will be displayed.
SECURITY PASSWORD CHANGE
NEW
CONFIRM
Press ▲▼◄► to set the
3.
password.
• Up to 8 buttons can be set as the password.
4. Press ENTER.
5. For the purposes of
confirmation, enter the password
again.
6. Press ENTER.
Note
• Only asterisks * will appear on the screen to
represent the actual characters of the password
when the password is entered.

Setting the text

The set text can be permanently displayed below the
pictures being projected.
Press ▲▼ to select "DISPLAY
1.
SETTING".
SECURITY PASSWORD CHANGE
DISPLAY SETTING
TEXT CHANGE
Press ◄► to switch "DISPLAY
2.
SETTING".
• The setting will change as follows each time
◄► is pressed.
OFF TEXT
LOGO3
OFF
OFF
OFF
LOGO1
LOGO2
• OFF:
The text display is disabled.
• TEXT:
The text display is enabled.
• LOGO1:
The picture registered by the user will be projected.
• LOGO2:
The picture registered by the user will be projected.
• LOGO3:
The Panasonic logo is projected.
Note
• Separate software is required in order to create the
pictures to use for "LOGO1" and "LOGO2". Consult
your dealer.

Changing the text

When DISPLAY SETTING is enabled, you can change
the text that is displayed.
Press ▲▼ to select "TEXT
1.
CHANGE".
DISPLAY SETTING
TEXT CHANGE
CONTROL DEVICE SETUP
2. Press ENTER.
• The "TEXT CHANGE" screen will be displayed.
TEXT CHANGE
SELECT
A B C D E F G H I J K L M N O
P Q R S T U V W X Y Z ; : , .
a b c d e f g h i j k l m n o
p q r s t u v w x y z / + - *
0 1 2 3 4 5 6 7 8 9
< > BS
Press ◄► to select the text
3.
position, and press ▲▼ to select
the characters of the text.
4. Press ENTER.
• The text is now changed.
OFF
_ @ [ ]
OK CANCEL
ENGLISH – 89