Panasonic PT-D12000U Operating Instructions Manual page 63

• OFF:
Geometry correction is not performed.
• KEYSTONE:
This adjusts projected images when they are
distorted to a trapezoid.
• CURVED:
This adjusts projected images when they are
distorted to a curved surface.
• PC:
This is for performing geometry correction from a PC.
3. Select "KEYSTONE" or
"CURVED" in Step 2, and then
press ENTER.
• The "GEOMETRY:KEYSTONE" or
"GEOMETRY:CURVED" screen will be
displayed.
GEOMETRY:KEYSTONE
VERTICAL KEYSTONE
VERTICAL SUB KEYSTONE
GEOMETRY:CURVED
LENS THROW RATIO
VERTICAL KEYSTONE
Press ▲▼ to select the desired
4.
adjustment item, and press ◄►
to adjust the correction amount.
• You can adjust the projection images as shown
below.
KEYSTONE menu:
• VERTICAL KEYSTONE
• VERTICAL SUB KEYSTONE
• HORIZONTAL KEYSTONE
• HORIZONTAL SUB KEYSTONE
•
CURVED menu:
•
•
•
0
0
0
0
•
•
•
•
Note
• If vertical keystone correction is set, menus and logos
may be projected outside of the actual image area.
• If both edge blending adjustment and geometry
correction are used, set the geometry correction
to curved-surface correction or PC. If geometry
correction is set to keystone-distortion correction,
edge blending adjustment cannot be made
correctly. (p. 66)
LINEARITY
LENS THROW RATIO
Set to the throw ratio being used (the
projection distance divided by the screen
width). (pp. 22-24)
VERTICAL KEYSTONE
HORIZONTAL KEYSTONE
VERTICAL ARC
HORIZONTAL ARC
VERTICAL BALANCE
HORIZONTAL BALANCE
ENGLISH – 63