Raster Position - Panasonic PT-D12000U Operating Instructions Manual

How to use ADVANCED MENU (continued)
Press ◄► to switch "FRAME
2.
DELAY".
• The setting will change as follows each time
◄► is pressed.
DEFAULT
• DEFAULT:
This is the standard setting.
• SHORT:
Shortens the delay at the expense of some picture
quality.
Note
• When "FRAME DELAY" is set to "SHORT",
deterioration in the picture quality will occur.
Furthermore, the noise reduction function cannot be
used.

Raster position

When the scaler is set such that the image is smaller
than the display area, the image can be moved to any
position inside the display area.
Press ▲▼ to select "RASTER
1.
POSITION".
EDGE BLENDING
FRAME DELAY
RASTER POSITION
2. Press ENTER.
• The "RASTER POSITION" screen will be
displayed.
RASTER POSITION
V
H
Press ▲▼◄► to adjust the
3.
position.
PT-D12000U
When 5:4 pictures are displayed
(when SXGA signals are input)
Pressing ► button will move
the image to the right.
Pressing ◄ button will move
the image to the left.
68 – ENGLISH
SHORT
4.
OFF
DEFAULT
0
0
When 16:9 pictures are displayed
(when HDTV or 480p pictures are input or
16:9 is selected in the SIZE mode)
Pressing ▲ button will move
the image upward.
Pressing ▼ button will move
the image downward.
PT-DZ12000U
When 4:3 pictures are displayed
Pressing ► button will move
the image to the right.
Pressing ◄ button will move
the image to the left.
Press MENU three times.
• The on-screen indications disappear and the
normal screen appears again.