Cleaning The Air Filter - Panasonic PT-D12000U Operating Instructions Manual

Status
Displays the status of the projector.
Press ▲▼ to select "STATUS".
1.
REMOTE2 MODE
STATUS
AIR FILTER CLEANING
2. Press ENTER.
• The "STATUS" screen will be displayed.
STATUS
INPUT
NAME
SIGNAL FREQUENCY
PROJECTOR RUNTIME
LAMP1
LAMP2
LAMP3
LAMP4
INTAKE AIR TEMP.
OPTICS MODULE TEMP.
AROUND LAMP TEMP.
REMOTE2 STATUS
Press ◄► to move to the next
3.
page.
STATUS
PROJECTOR MODEL
SERIAL NUMBER
MAIN VERSION
SUB VERSION
NETWORK VERSION
Press ◄► to move to the next
4.
page.
STATUS
ON COUNT
POWER ON TIMES
LAMP1 ON
LAMP2 ON
LAMP3 ON
LAMP4 ON
SHUTTER
AIR FILTER CLEANING
AUX
NUMBER OF ENTRY SIGNAL
AC VOLTAGE
• INPUT:
Displays the input selection state.
• NAME:
Displays the input signal name.
• SIGNAL FREQUENCY:
Displays the frequency of the input signal.
• PROJECTOR RUNTIME:
Displays the projector runtime.
• LAMP1:
Displays the lighting time of LAMP1.
• LAMP2:
Displays the lighting time of LAMP2.
• LAMP3:
Displays the lighting time of LAMP3.
DEFAULT
1/3
RGB2
XGA60-A399999
48.36kHz/59.99Hz
76h
341h / ON /
334h / ON /
342h / ON /
97h / ON /
31°C/87°F
27°C/80°F
31°C/87°F
DISABLE
2/3
DZ12000
SWXXXXX
1.00.00
0.04
1.01
3/3
8
362
363
366
116
0( 6)
1( 1)
MD77SD1:SN
0/96
NORMAL
• LAMP4:
Displays the lighting time of LAMP4.
• INTAKE AIR TEMP:
Displays the intake air temperature of the projector.
• OPTICS MODULE TEMP.:
Displays the temperature inside the projector.
• AROUND LAMP TEMP.:
Displays the temperature around the lamp of the
projector.
• REMOTE2 STATUS:
Displays the control status of REMOTE2.
• PROJECTOR MODEL:
Displays the type of projector.
• SERIAL NUMBER:
Displays the serial number of the projector.
• MAIN VERSION:
Displays the main version of the firmware of the
projector unit.
• SUB VERSION:
Displays the sub version of the firmware of the
projector unit.
• NETWORK VERSION:
Displays the network version of the projector unit.
• ON COUNT:
POWER ON TIMES:
Displays the number of times the power has
been turned on.
LAMP1 ON:
Displays the number of times LAMP1 has been lit.
LAMP2 ON:
Displays the number of times LAMP2 has been lit.
LAMP3 ON:
Displays the number of times LAMP3 has been lit.
LAMP4 ON:
Displays the number of times LAMP4 has been lit.
SHUTTER:
Displays the number of times the shutter function
has been used.
AIR FILTER CLEANING:
Displays the number of times the air filter has
been cleaned.
• AUX:
Displays the name of the optional input module
inserted in the input module.
• NUMBER OF ENTRY SIGNAL:
Displays the number of registered signals.
• AC VOLTAGE:
Displays the AC voltage state.

Cleaning the air filter

This can be used to set air filter cleaning.
Press ▲▼ to select "AIR FILTER
1.
CLEANING".
STATUS
AIR FILTER CLEANING
AUTO POWER OFF DISABLE
ENGLISH – 81