Frame Delay - Panasonic PT-D12000U Operating Instructions Manual

10. Press ENTER.
• The "BRIGHT ADJUST" screen will be
displayed.
BRIGHT ADJUST
BRIGHT INSIDE
BRIGHT OUTSIDE
Press ▲▼ to select "BRIGHT
11.
INSIDE".
12. Press ENTER.
• The "BRIGHT INSIDE" adjustment screen will
be displayed.
BRIGHT INSIDE
INTERLOCKED
WHITE
RED
GREEN
BLUE
• When "INTERLOCKED" is set to "OFF",
individual adjustment of "RED", "GREEN" and
"BLUE" will be possible.
Press ▲▼ to select an item, and
13.
press ◄► to adjust the setting.
• Once adjustment is complete, press MENU to
return to "BRIGHT ADJUST".
Press ▲▼ to select the part of
14.
"UPPER", "LOWER", "RIGHT",
"LEFT".
Use ◄► to adjust the width for
15.
correcting the "BRIGHT INSIDE"
setting (0 to 255).
Press ▲▼ to select "BRIGHT
16.
OUTSIDE".
BRIGHT INSIDE
BRIGHT OUTSIDE
OUTSIDE AREA
17. Press ENTER.
• The "BRIGHT OUTSIDE" adjustment screen will
be displayed.
BRIGHT OUTSIDE
INTERLOCKED
WHITE
RED
GREEN
BLUE
• When "INTERLOCKED" is set to "OFF",
individual adjustment of "RED", "GREEN" and
"BLUE" will be possible.
ON
0
0
0
0
ON
0
0
0
0
Press ▲▼ to select an item, and
18.
press ◄► to adjust the setting.
Projection Edge blending width (right)
range
BRIGHT adjustment
(right)
BRIGHT OUTSIDE
BRIGHT INSIDE
Note
• The Bright Inside adjustments are used to match
the projector's main-screen-area black levels to the
level within the blended area. The Bright Outside
adjustments may be used to fine adjust the thin
borders on either side of the blend area, but are
often not needed.
• When a rear screen or screen with a high gain
is used, the blended areas may appear to be
discontinuous depending on the viewing position.

Frame delay

When 1 080/60i, 1 080/50i and 1 080/24sF signals are
being input, this simplifies image processing so that
the video frame delay is shortened.
Press ▲▼ to select "FRAME
1.
DELAY".
EDGE BLENDING
FRAME DELAY
RASTER POSITION
Marker
OFF
DEFAULT
ENGLISH – 67