Table of Contents
Advertisement
[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the sub-
menu.
Refer to "Navigating through the menu" (x page 72) for the operation of the menu screen.
[COLOR ADJUSTMENT]
Correct the color difference between projectors when using multiple projectors simultaneously.
Adjusting the color adjustment as desired
1)
Press as to select [COLOR ADJUSTMENT].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[3COLORS]
[7COLORS]
3)
Select [3COLORS] or [7COLORS], and press the <执行> button.
f The [3COLORS] or [7COLORS] screen is displayed.
4)
Press as to select [RED], [GREEN], [BLUE], or [WHITE] ([RED], [GREEN], [BLUE], [CYAN],
[MAGENTA], [YELLOW], or [WHITE] when [7COLORS] is selected).
5)
Press the <执行> button.
f The [3COLORS:RED], [3COLORS:GREEN], [3COLORS:BLUE], or [3COLORS:WHITE] screen is
displayed.
When [7COLORS] is selected, the [7COLORS:RED], [7COLORS:GREEN], [7COLORS:BLUE],
[7COLORS:CYAN], [7COLORS:MAGENTA], [7COLORS:YELLOW], or [7COLORS:WHITE] screen is
displayed.
f By setting [AUTO TESTPATTERN] to [ON], the test pattern for the selected color is displayed.
6)
Press as to select [RED], [GREEN], or [BLUE].
f Only [GAIN] can be adjusted when [WHITE] is selected for [3COLORS].
7)
Press qw to adjust.
f The adjustment value will change between 0
*1 The lower limit varies depending on the color to be adjusted.
Note
f Operation when correcting the adjustment color
When the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.
When correction color red is changed: Red is added to or subtracted from the adjustment color.
When correction color green is changed: Green is added to or subtracted from the adjustment color.
When correction color blue is changed: Blue is added to or subtracted from the adjustment color.
f Since advanced skills are necessary for the adjustment, this adjustment should be carried out by a person who is familiar with the projector
or by a service person.
f When the <默认> button on the remote control is pressed, the selected adjustment item will return to the factory default value for the current
picture mode.
f When this item is set to anything other than [OFF], the [DISPLAY OPTION] menu → [COLOR CORRECTION] is fixed to [OFF], and the
[PICTURE] menu → [COLOR TEMPERATURE] is fixed to [USER].
[COLOR CORRECTION]
Colors can be adjusted and registered for each input signal format.
1)
Press as to select [COLOR CORRECTION].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
98 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Does not perform the color adjustment.
Adjusts the three colors [RED], [GREEN], or [BLUE] and [GAIN] for white.
Adjusts the seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE].
and 2 048.
*1
Standard setting.
Advertisement
Table of Contents
