Panasonic PT-D1000 Specifications
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Projector
  5. PT-D1000
  6. Specifications
Panasonic PT-D1000 Specifications

Panasonic PT-D1000 Specifications

Panasonic pt-d1000: user guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Panasonic Projector RS-232C Control Specifications
P T- D W 1 0 0 0 0 / D 1 0 0 0 0

Advertisement

Table of Contents
loading

Related Manuals for Panasonic PT-D1000

Summary of Contents for Panasonic PT-D1000

  • Page 1 Panasonic Projector RS-232C Control Specifications P T- D W 1 0 0 0 0 / D 1 0 0 0 0...

  • Page 2: Using The Serial Terminals

    Using the Serial Terminals 1. Basic Format Transmission from the computer begins with STX, then the ID, command, parameter, and ETX are sent in this order. Add parameters according to the details of control. Basic control command (without parameter) Start (STX) 1 byte 4 bytes...
  • Page 3 Make the communication conditions the same between output/input. IN and OUT can be independently set respectively. (When you set RS-422 OUT of the first projector to 38 400 bps, set RS-422 IN of the second projector to 38 400 bps.) •...

  • Page 4: Auto Setup

    2. Basic Control Command Explanatory notes Yes: Enable No: Disable 2.1. Power ON (Lamp ON) Hexadecimal Character Response (Callback) In the period when the command can be accepted (This command in power-on condition is included) Hexadecimal Character Acceptability SECURITY STNDBY Notes: •...

  • Page 5: Test Pattern

    2.5. Input Change Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6) Hexadecimal Character Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Notes: • REMOTE2 is given to priority. Calls back ER402 if the input select of REMOTE2 is available. •...
  • Page 6 2.8. MENU key Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY 2.9. ENTER key Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY 2.10.

  • Page 7: System Selector

    2.13. Right ( ) key Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY 2.14. DEFAULT key Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY...

  • Page 8: Lamp Select

    2.18. LAMP SELECT Hexadecimal Character Parameters (*1, *2, *3, *4) QUAD Hexadecimal Character L1/L2/L4 Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Note: • During the lamp change processing, ER401 is returned. 2.19.
  • Page 9 2.21. SUB MEMORY CHANGE (Enhanced) Hexadecimal Character Hexadecimal Character Parameters mm of submemory number (mm–nn) (*1,*2,*3,*4) Hexadecimal Character Hexadecimal Character nn of submemory number (mm–nn) (*5, *6, *7, *8) Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability...

  • Page 10: Picture Mode

    2.24. PICTURE MODE Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6) DYNAMIC Hexadecimal Character STANDARD Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY 2.25. COLOR Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6)

  • Page 11: Color Temp

    2.27. COLOR TEMP. Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4) Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Note: • If you specify parameters other than USER1 when COLOR MATCHING is not OFF, ER402 is returned. 2.28.
  • Page 12 2.30. WHITE BALANCE LOW — B Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6) Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Notes: • When a parameter other than USER1 or USER2 is specified for COLOR TEMP., ER401 is returned. •...
  • Page 13 2.33. WHITE BALANCE HIGH — B Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6) Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Note: • When a parameter other than USER1 or USER2 is specified for COLOR TEMP., ER401 is returned. 2.34.

  • Page 14: Noise Reduction

    2.36. SHARPNESS Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6) Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY 2.37. NOISE REDUCTION Hexadecimal Character Hexadecimal Character Parameters (*1, *2) Hexadecimal Character...

  • Page 15: Dynamic Iris

    2.38. DYNAMIC IRIS Hexadecimal Character Hexadecimal Character Parameters (*1, *2) Mode Hexadecimal Character * When Mode is OFF—USER, parameters *3—*6 are not sent. Example: When you set USER into Mode Hexadecimal Character * When Mode is AUTO IRIS or DYNAMIC GAMMA, parameters *5 and *6 are not sent. Example: When Mode is AUTO IRIS and you set 3 into AUTO IRIS Hexadecimal Character...
  • Page 16 2.41. DYNAMIC IRIS (MANUAL IRIS) Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4) Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY 2.42. DYNAMIC IRIS (DYNAMIC GAMMA) Hexadecimal Character Hexadecimal Character...
  • Page 17 2.44. SHIFT H Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6, *7, *8) Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Note: • The maximum value that can be actually set changes according to the input signal and the input resolution setting, etc. 2.45.
  • Page 18 2.46. ASPECT Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4) • Input route: VIDEO Input signal: NTSC VID AUTO Hexadecimal Character HV FIT Hexadecimal Character • Input route: VIDEO Input signal: Except NTSC DEFAULT Hexadecimal Character HV FIT Hexadecimal Character •...

  • Page 19: Clock Phase

    2.47. ZOOM H Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6) Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Notes: • When ASPECT is THROUGH, ER401 is returned. •...
  • Page 20 2.50. INPUT RESOLUTION — TOTAL DOTS Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6, *7, *8) Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Notes: •...

  • Page 21: Clamp Position

    2.52. INPUT RESOLUTION — TOTAL LINES Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6, *7, *8) Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Notes: •...
  • Page 22 2.55. KEYSTONE Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6, *7, *8) Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY 2.56. KEYSTONE2 Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6, *7, *8) Hexadecimal...

  • Page 23: Display Language

    2.58. DISPLAY LANGUAGE Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6) Hexadecimal Character Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY 2.59. BLANKING — UPPER Hexadecimal Character Hexadecimal...
  • Page 24 2.60. BLANKING — LOWER Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6) Hexadecimal Character D10000 Hexadecimal Character DW10000 Hexadecimal Character Note: • The maximum value that can be set changes according to the setting condition of the input signal, ASPECT and ZOOM. Response (Callback) In the period when the command can be accepted Hexadecimal...
  • Page 25 2.62. BLANKING — LEFT Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6) Hexadecimal Character D10000 Hexadecimal Character DW10000 Hexadecimal Character Note: • The maximum value that can be set changes according to the setting condition of the input signal, ASPECT and ZOOM. Response (Callback) In the period when the command can be accepted Hexadecimal...
  • Page 26 2.65. P IN P Hexadecimal Character Hexadecimal Character Parameters (*1, *2) Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Note: • When FRAME DELAY is set besides DEFAULT, ER401 is returned. 2.66.
  • Page 27 2.68. P IN P — MAIN WINDOW:SIZE — V Hexadecimal Character Hexadecimal Character Parameters(*1, *2, *3, *4, *5, *6) Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Note: •...
  • Page 28 2.71. P IN P — MAIN WINDOW:POSITION — V Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6, *7, *8) D10000 Hexadecimal Character Hexadecimal Character DW10000 Hexadecimal Character Hexadecimal Character Note: • The maximum value and minimum value that can be actually set change according to the setting condition of the input signal, ASPECT and ZOOM.
  • Page 29 2.73. P IN P — SUB WINDOW Hexadecimal Character Hexadecimal Character Parameters (*1, *2) Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Note: • When FRAME DELAY is set besides DEFAULT, ER401 is returned. •...
  • Page 30 2.76. P IN P — SUB WINDOW:SIZE — H Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6) Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Note: •...
  • Page 31 2.78. P IN P — SUB WINDOW:POSITION — V Hexadecimal Character Hexadecimal Character Parameters (*1, *2, *3, *4, *5, *6, *7, *8) D10000 Hexadecimal Character Hexadecimal Character DW10000 Hexadecimal Character Hexadecimal Character Note: • The maximum value and minimum value that can be actually set change according to the setting condition of the input signal, ASPECT and ZOOM.
  • Page 32 2.80. P IN P — FRAME LOCK Hexadecimal Character Hexadecimal Character Parameters (*1, *2) MAIN WINDOW Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Note: • When FRAME DELAY is set besides DEFAULT, ER401 is returned. •...
  • Page 33 2.83. Set Time Hexadecimal Character Hexadecimal Character Parameters *h1, *h2: Hour (2 digits) *m1, *m2 Minute (2 digits) *s1, *s2 Second (2 digits) Set it by UTC (Coordinated Universal Time). Example: 3 seconds at 3:45 p.m. Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character...
  • Page 34 2.86. Query Input Change Hexadecimal Character Response (Callback) RGB1 Hexadecimal Character RGB2 Hexadecimal Character VIDEO Hexadecimal Character S VIDEO Hexadecimal Character Hexadecimal Character Hexadecimal Character Acceptability SECURITY STNDBY 2.87. Query TEST PATTERN Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Parameters (*1, *2, *3, *4)
  • Page 35 2.89. Query PICTURE MODE Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters(*1,*2,*3,*4,*5,*6) DYNAMIC Hexadecimal Character STANDARD Hexadecimal Character 2.90. Query COLOR Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability...
  • Page 36 2.92. Query COLOR TEMP. Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2, *3, *4) Hexadecimal Character Note: • The response (callback) other than DEFAULT (10) is one digit. 2.93.
  • Page 37 2.95. WHITE BALANCE LOW — B Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2, *3, *4, *5, *6) Hexadecimal Character Hexadecimal Character Notes: • When a parameter other than USER1 or USER2 is specified for COLOR TEMP., ER401 is returned. •...
  • Page 38 2.98. Query WHITE BALANCE HIGH — B Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2, *3, *4, *5, *6) Hexadecimal Character Hexadecimal Character Note: • When a parameter other than USER1 or USER2 is specified for COLOR TEMP., ER401 is returned. 2.99.
  • Page 39 2.101. Query SHARPNESS Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2, *3, *4, *5, *6) Hexadecimal Character Hexadecimal Character 2.102. Query NOISE REDUCTION Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character...
  • Page 40 2.104. Query DYNAMIC IRIS Hexadecimal Character Parameters (*1, *2) Hexadecimal Character Response (Callback) In the period when the command can be accepted When AUTO IRIS or DYNAMIC-GAMMA is specified for the parameter (*1, *2) Hexadecimal Character When MANUAL IRIS is specified for the parameter (*1, *2) Hexadecimal Character Acceptability...
  • Page 41 2.106. Query SHIFT H Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2, *3, *4, *5, *6, *7, *8) Hexadecimal Character Hexadecimal Character 2.107. Query SHIFT V Hexadecimal Character Hexadecimal...
  • Page 42 2.108. Query ASPECT Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2, *3, *4) • Input route: VIDEO Input signal: NTSC VID AUTO Hexadecimal Character HV FIT Hexadecimal Character •...
  • Page 43 2.109. Query ZOOM H Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2, *3, *4, *5, *6) Hexadecimal Character Hexadecimal Character Notes: • When ASPECT is THROUGH, ER401 is returned. •...
  • Page 44 2.112. Query INPUT RESOLUTION — TOTAL DOTS Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2, *3, *4, *5, *6, *7, *8) Hexadecimal Character Hexadecimal Character Note: • This command is acceptable only when RGB1 or RGB2 is selected and RGB signals are input. In other cases, ER401 is returned.
  • Page 45 2.115. Query INPUT RESOLUTION — DISPLAY LINES Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2, *3, *4, *5, *6, *7, *8) Hexadecimal Character Hexadecimal Character Note: • This command is acceptable only when RGB1 or RGB2 is selected and RGB signals are input. In other cases, ER401 is returned.
  • Page 46 2.118. Query KEYSTONE2 Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2, *3, *4, *5, *6, *7, *8) Hexadecimal Character Hexadecimal Character 2.119. Query LINEARITY Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character...
  • Page 47 2.121. Query BLANKING — UPPER Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2, *3, *4, *5, *6) Hexadecimal Character D10000 Hexadecimal Character DW10000 Hexadecimal Character 2.122. Query BLANKING — LOWER Hexadecimal Character Response (Callback)
  • Page 48 2.123. Query BLANKING — RIGHT Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters(*1,*2,*3,*4,*5,*6) Hexadecimal Character D10000 Hexadecimal Character DW10000 Hexadecimal Character 2.124. Query BLANKING — LEFT Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character...
  • Page 49 2.126. Query PROJECTOR RUNTIME Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2, *3, *4, *5, *6, *7, *8, *9, *10) Hexadecimal Character Hexadecimal Character 2.127. Query LAMP RUNTIME...
  • Page 50 2.129. Query Lamp Status Hexadecimal Character Response (Callback) Lamp OFF Hexadecimal Character In turning ON Hexadecimal Character Lamp ON Hexadecimal Character Cooling Hexadecimal Character Acceptability SECURITY STNDBY 2.130. Query VPS SYSTEM Hexadecimal Character Response (Callback) SLAVE Hexadecimal Character MASTER Hexadecimal Character Acceptability SECURITY...
  • Page 51 2.132. Query ALTITUDE Hexadecimal Character Response (Callback) Hexadecimal Character HIGH Hexadecimal Character Acceptability SECURITY STNDBY 2.133. Query FUNC1 Hexadecimal Character Response (Callback) P IN P Hexadecimal Character SUB MEMORY LIST Hexadecimal Character SYSTEM SELECTOR Hexadecimal Character Acceptability SECURITY STNDBY 2.134. Query Usage Condition of Sub Memory Hexadecimal Character Response (Callback)
  • Page 52 2.136. Query AUX DVI EDID Hexadecimal Character Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2) Hexadecimal Character 2.137. Query P IN P Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability...
  • Page 53 2.139. Query P IN P — MAIN WINDOW:SIZE Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2, *3, *4) INTERLOCKED Hexadecimal Character Parameters (*5, *6, *7, *8, *9, *10) V SIZE Hexadecimal Character...
  • Page 54 2.140. Query P IN P — MAIN WINDOW:POSITION Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2, *3, *4, *5, *6, *7, *8) V POSITION D10000 Hexadecimal Character Hexadecimal Character DW10000...
  • Page 55 2.142. Query P IN P — SUB WINDOW:SIZE Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2, *3, *4) INTERLOCKED Hexadecimal Character Parameters (*5, *6, *7, *8, *9, *10) V SIZE Hexadecimal Character...

  • Page 56: Main Window

    2.143. Query P IN P — SUB WINDOW:POSITION Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2, *3, *4, *5, *6, *7, *8) V POSITION D10000 Hexadecimal Character Hexadecimal Character DW10000...
  • Page 57 2.145. Query P IN P — TYPE Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability SECURITY STNDBY Parameters (*1, *2) MAIN WINDOW Hexadecimal Character Note: •When FRAME DELAY is set besides DEFAULT, ER401 is returned. 2.146.
  • Page 58 2.148. Query Model (Series) Name Hexadecimal Character Response (Callback) In the period when the command can be accepted D10000 Hexadecimal Character DW10000 Hexadecimal Character Acceptability SECURITY STNDBY 2.149. Query Lamp ON Status Hexadecimal Character Response (Callback) In the period when the command can be accepted Hexadecimal Character Acceptability...
  • Page 59 ID of the extended control command Hexadecimal (1 byte) ID23 ID24 ID25 ID26 ID27 ID28 ID29 ID30 ID31 ID32 ID10 ID33 ID11 ID34 ID12 ID35 ID13 ID36 ID14 ID37 ID15 ID38 ID16 ID39 ID17 ID40 ID18 ID41 ID19 ID42 ID20 ID43 ID21 ID44...
  • Page 60 2.151. SELF CHECK Information Hexadecimal Remarks Response (Callback) In the period when the command can be accepted Hexadecimal Acceptability SECURITY STNDBY Parameters (*2—*17) Name Temperature warning (IN) Temperature warning (OPT) Temperature warning (OUT) Low temperature warning (OPT) Temperature error (IN) Temperature error (OPT) Temperature error (OUT) Low temperature error (OPT)
  • Page 61 Thermosensor disconnected (IN) Thermosensor disconnected (OPT) Thermosensor disconnected (OUT) Airflow sensor disconnected Air filter is blocked Internal clock battery replacement — — — — — — — — — — Fan error 1 Fan error 2 Fan error 3 Fan error 4 Fan error 5 Fan error 6 Fan error 7...
  • Page 62 — Internal error (Used in main CPU) Internal error (Used in main CPU) Note: • In this projector, must specify option FEh. RDRAM test error Communication error with FM All fans have stopped in the factory mode. Error Axx has been occurred.

This manual is also suitable for:

Pt-dw10000Rs-232c

Table of Contents