Panasonic PT-D12000U Operating Instructions Manual page 76

Display Option settings (continued)
Press ◄► to switch "BACK
2.
COLOR".
• The setting will change as follows each time
◄► is pressed.
BLACK
LOGO3
• BLACK:
The entire projection area will appear black.
• BLUE:
The entire projection area will appear blue.
• LOGO1:
The picture registered by the user will be projected
in the projection area.
• LOGO2:
The picture registered by the user will be projected
in the projection area.
• LOGO3:
The Panasonic logo is projected.
Note
• Separate software is required in order to create the
pictures to use for "LOGO1" and "LOGO2". Consult
your dealer.
Setting the startup logo
This sets the startup logo that is projected when the
power is turned on.
Press ▲▼ to select "STARTUP
1.
LOGO".
ON-SCREEN DISPLAY
BACK COLOR
STARTUP LOGO
Press ◄► to switch "STARTUP
2.
LOGO".
• The setting will change as follows each time
◄► is pressed.
LOGO3
LOGO2
• LOGO3:
The Panasonic logo and DIGITAL PROJECTOR logo
are projected.
• NONE:
No startup logo is projected.
• LOGO1:
The picture registered by the user will be projected.
• LOGO2:
The picture registered by the user will be projected.
76 – ENGLISH
BLUE LOGO1
LOGO2
BLACK
LOGO3
NONE
LOGO1
Note
• Separate software is required in order to create the
pictures to use for "LOGO1" and "LOGO2". Consult
your dealer.