Panasonic PT-D12000U Operating Instructions Manual page 35

Connecting signals to the DVI-D input module
PC with DVI output
• Pin assignments and signal names of DVI-D input
terminal are listed in the table at right.
1
9
q
Outside view
Note
• The DVI-D signal input module supports only a single link.
• The HDMI-DVI-D conversion cable is required to connect an HDMI-compliant device.
• When using the DVI-D input, EDID settings may be required for the connected device. (pp. 73, 74)
• It is possible to connect the DVI-D input module with an HDMI- or DVI-D-compliant device, but with some
devices the images may not appear or other problems may be encountered in operation.
*1: The LAN terminal present on the optional input card cannot be used with the PT-D12000U/PT-DZ12000U. Use
the LAN terminal that is provided as standard with the projector.
DVI-D input module (optional)
ET-MD77DV
DVI Module
DVI-D IN
ET-MD77DV
DVI-D signal
DVD player or high-vision
video deck equipped with
8
p
x
LAN
*1
LAN terminal
(10BASE-T/100BASE-TX)
DVD/HDMI terminal
Pin
Signal
No.
1
T.M.D.S data 2–
2
T.M.D.S data 2+
T.M.D.S data 2 / 4
3
shield
4
5
6
DDC clock
7
DDC data
8
9
T.M.D.S data 1–
j
T.M.D.S data 1+
T.M.D.S data 1 / 3
k
shield
l
Pin
Signal
No.
m
n
+5V
o
Ground
p
Hot plug detection
q
T.M.D.S data 0-
r
T.M.D.S data 0+
T.M.D.S data 0 / 5
s
shield
t
u
v
T.M.D.S clock shield
w
T.M.D.S clock+
x
T.M.D.S clock–
ENGLISH – 35