Connection Terminals - Panasonic PT-D12000U Operating Instructions Manual

Location and function of each part (continued)

Connection terminals

1 REMOTE1 lN/OUT terminal ････････････ (p. 18)
When two or more main units are used in the
system, they can be connected and controlled
with a wired remote control cable (M3 jack).
2 REMOTE2 IN terminal ････････････････ (p. 110)
The user can remotely control the main unit by
using an external control circuit to this terminal
(D-SUB 9-pin female).
3 SERIAL IN terminal････ (pp. 28-29, 80, 106-109)
RS-232C compliant input terminal (switching
necessary) to connect a PC and to externally
control the main unit (D-SUB 9-pin female).
4 SERIAL IN terminal････ (pp. 28-29, 80, 106-109)
RS-422 compliant input terminal (switching
necessary) to connect a PC and to externally
control the main unit (D-SUB 9-pin female).
5 SERIAL OUT terminal ････････(pp. 29, 106-109)
RS-422 compliant output terminal (switching
necessary) to loop through signals from the Serial
Input terminals (D-SUB 9-pin male).
16 – ENGLISH
1 2
7 8 9
3 4
j k l
6 LAN terminal (10BASE-T/100BASE-TX)
･･･････････････････････････････ (pp. 28-29, 93)
The projector can be connected to a network and
controlled through it's onboard web page.
7 VIDEO IN terminal･････････････････････ (p. 28)
An input terminal for video signals. (BNC)
8 VIDEO OUT terminal ･･････････････････ (p. 28)
An output terminal (active through) for video
signals. (BNC)
9 S-VIDEO IN terminal ･･････････････････ (p. 28)
An input terminal for S-video signals (Mini DIN
4-pin). This terminal complies with S1 signals
and automatically toggles between 16:9 and 4:3
according to the size of input signals.
j RGB (YP
P
B R
A terminal to input RGB or YP
5-wire BNC).
k RGB2 IN terminal ･････････････････････ (p. 29)
A terminal to input RGB or YP
15-pin female).
l DVI-D IN terminal ･････････････････ (pp. 28, 29)
An input terminal for single-link DVI-D signals.
5 6
) 1 IN terminal ･････････ (pp. 28, 29)
P signals (3, 4 or
B R
P signals (D-SUB
B R