Press ◄► to switch "AUTO
4.
SIGNAL".
•
The setting will change as follows each time
◄► is pressed.
OFF
•
If unregistered signals are input when "ON"
is selected, auto setup will be initiated
automatically.
AUTO SETUP
Press ▲▼ to select "AUTO
5.
SETUP".
6.
Press ENTER.
•
The "AUTO SETUP" screen will be displayed.
AUTO SETUP
MODE
Press ◄► to switch "MODE".
7.
•
The setting will change as follows each time
◄► is pressed.
DEFAULT
WIDE
•
DEFAULT:
To receive signals of which image aspect is
4:3 or 5:4 (applicable resolution : 640 × 400,
640 × 480, 800 × 600, 832 × 624, 960 × 720,
1 024 × 768, 1 152 × 864, 1 152 × 870, 1 280 × 960,
1 280 × 1 024, 1 600 × 1 200, 1 400 × 1 050)
•
WIDE:
To receive signals of which the image aspect is
wide (applicable resolution: 720 x 400, 848 x 480,
1 280 x 720, 1 024 x 600, 1 120 x 750, 1 440 x 900,
1 680 x 1 050)
•
USER:
To receive signals of specific horizontal resolution
(number of horizontally displayed dots)
If "User" is selected, press ◄►
8.
to enter the horizontal resolution
of signal source into "DISPLAY
DOTS".
9.
Press ENTER.
•
Execute automatic adjustment. A message
"PROGRESS..." appears during automatic
adjustment. When the adjustment is complete,
the system returns to the input screen.
DVI-D IN
Change this setting if video does not display normally
when the projector and an external device are
connected via DVI-D.
ON
1.
2.
3.
DEFAULT
•
EDID1 (Input signal formats supported) :
Mainly select this when an external device (DVD
player, etc.) for outputting video signals of a moving
USER
image system is connected to DVI-D IN.
•
EDID2 (Input signal formats supported) :
Mainly use this when an external device (PC, etc.)
for outputting video signals of a still image system
is connected to DVI-D IN.
4.
•
0-255:PC:
Select this when, for example, an external device
(PC, etc.) is connected via the DVI terminal output.
•
16-235:
Select this when, for example, an external device
(DVD player, etc.) is connected via the HDMI
terminal output using a conversion cable.
Note
•
The optimal setting differs depending on the output
setting of the connected external device. Refer to
the instruction manual of the external device.
•
If the setting is changed, the data for plug and
play changes. For the plug and play compatible
resolutions, check the compatible signal list
(pp. 122-123).
Press ▲▼ to select "DVI-D IN".
RGB IN
DVI-D IN
AUX DVI IN
Press ENTER.
•
The "DVI-D IN" screen will be displayed.
DVI-D IN
DVI EDID
DVI SIGNAL LEVEL
Press ◄► to switch "DVI EDID".
•
The setting will change as follows each time
◄► is pressed.
EDID1
Press ◄► to switch "DVI
SIGNAL LEVEL".
•
The setting will change as follows each time
◄► is pressed.
0-255:PC
EDID1
0-255:PC
EDID2(PC)
16-235
ENGLISH – 73