Registering The Picture Mode Settings As Presettings - Panasonic PT-D12000U Operating Instructions Manual

Adjusting the picture (continued)
AUTO IRIS (Automatic aperture
adjustment)
OFF (No automatic
adjustment)
3 (High)
MANUAL IRIS (Fixed aperture
adjustment)
OFF (No fixed iris)
63 (High)
DYNAMIC GAMMA (signal
compensation amount
adjustment)
OFF (No automatic
correction)
3 (High)
Note
• The contrast is set to the maximum level when
"DYNAMIC IRIS" is set to "3".
Registering the picture mode
settings as presettings
The picture settings that have been made in the
PICTURE MODE screen can be registered.
• Select "PICTURE MODE" in the "PICTURE" screen
to carry out this operation.
1. Press ENTER.
• A confirmation screen will appear.
SAVE AS DEFAULT SETTING
FOR DYNAMIC?
OK
CHANGE
ENTER EXECUTE
Press ◄► to select "OK".
2.
3. Press ENTER.
Note
• If the registered picture mode is selected after

registering the picture mode settings as presettings,

the new signals will be displayed with the registered
adjustments.
58 – ENGLISH
1 (Low)
2 (Intermediate)
1 (Low)
2...62 (Intermediate)
1 (Low)
2 (Intermediate)
CANCEL
Setting the system selector
This enables the projector to automatically recognize
input signals. Furthermore, if unstable signals are
input, the system format can be selected manually.
Press ▲▼ to select "SYSTEM
1.
SELECTOR".
NOISE REDUCTION
DYNAMIC IRIS
SYSTEM SELECTOR
2. Press ENTER.
• The "SYSTEM SELECTOR" screen will be
displayed.
SYSTEM SELECTOR
C AUTO1
AUTO2
Press ▲▼ to switch "SYSTEM
3.
SELECTOR", and then press
ENTER.
• The system formats that can be selected differ
depending on the input signals.
S-video / Video terminal input
signal
Select from AUTO1, AUTO2, NTSC, NTSC4.43,
PAL, PALM, PAL-N, SECAM, and PAL60.
Note
• Press the DEFAULT button to return to "AUTO1".
• "AUTO1" automatically selects from NTSC,
PAL, SECAM, NTSC4.43, and PAL60. "AUTO2"
automatically selects from NTSC, PAL-M, and
PAL-N.
RGB1 / RGB2 / DVI-D terminal
input signal
Select from RGB and YP
Note
• Refer to the types of signals compatible with the
projector. (pp. 122-123)
Input module
ET-MD77SD1:
Select from AUTO, 480i and 576i.
ET-MD77SD3:
Select from AUTO, 1 080/60i, 1 035/60i, 720/60p,
1 080/24p, 1 080/50i, 1 080/30p, 1 080/25p,
1 080/24sF, 720/50p, and 480i, 576i.
OFF
OFF
AUTO1
P .
B R