How To Use Network Functions; Network Standby - Panasonic PT-D12000U Operating Instructions Manual

How to use network functions

MENU
This allows you to use network functions.
MENU
Press to display the MAIN
MENU screen.
Press to select
"NETWORK".
Press to display the
"NETWORK" menu.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
P IN P
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
ENTER

Network standby

When the projector is in a standby state, you can
control the power of the projector from a computer
connected via a wired LAN.
Press ▲▼ to select "NETWORK
1.
STANDBY".
NETWORK
NETWORK STANDBY
▲▼◄►
NETWORK SETUP
ENTER
Press ◄► to switch "NETWORK
2.
STANDBY".
• The setting will change as follows each time
◄► is pressed.
• ON:
DEFAULT
Enables the network standby function.
• OFF:
Disables the network standby function.
Initial setting of network
function
Make the initial network function settings before using
the network functions.
Press ▲▼ to select "NETWORK
1.
SETUP".
NETWORK STANDBY
NETWORK SETUP
NETWORK CONTROL
2. Press ENTER.
• The "NETWORK SETUP" screen will be
displayed.
NETWORK SETUP
HOST NAME
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY
STORE
Press ▲▼ to select items, and
3.
press ENTER to change the
setting.
• HOST NAME (Display of host name and
setting) :
Change as needed when using a DHCP server.
OFF
192. 168.
255. 255. 255.
192. 168.
ENGLISH – 91
OFF
ON
OFF
PROJECTOR
OFF
0. 8
0
0. 1