How To Install And Remove The Projection Lens (Optional) - Panasonic PT-D12000U Operating Instructions Manual

How to install and remove the projection lens (optional)

Adjust the lens shift position so that it is at the home
position (p. 41) before installing or removing the
projection lens.
Attention
• Remove the dust-proof sponge from the lens fitting
of the projector before installing the projection lens.
(Keep the dust-proof sponge in a safe place for
later use if needed.)
• After removing the projection lens, install the dust-
proof sponge to the lens fitting of the projector in
order to stop dust from getting inside the projector.
How to install the
projection lens
1. While pressing the projection
lens cover lock button, pull the
cover forward to remove it.
Projection lens cover lock button
2. Align the mark (orange) on
the projection lens with the
mark on the projector (
then insert the lens and turn
it clockwise until it clicks into
place.
36 – ENGLISH
OPEN
FILTER
CLEANING
CLOSE
), and
Mark (orange)
3. Push the projection lens cover in
until it clicks into place.
How to remove the
projection lens
1. While pressing the projection
lens cover lock button, pull the
cover forward to remove it.
Projection lens cover lock button
2. While holding down the
projection lens lock button,
turn the projection lens counter
clockwise, and then pull it off.
Projection lens lock button
OPEN
FILTER
CLEANING
CLOSE