Network Config Page - Panasonic PT-D12000U Operating Instructions Manual

Adjust clock page
Click [Detailed set up], then [Adjust clock] to display the Adjust clock page.
Note
• If the time becomes incorrect immediately after setting the correct time, then the battery needs to be changed.
Contact the dealer where you bought the projector to have the battery changed.

Network config page

Click [Detailed set up], then [Network config] to display the Network config page.
Time zone selection
Button to update time zone setting
New date field
New time field
Button to update time and date settings
Set this to ON to enable the DHCP client
function.
Enter the IP address if DHCP server is not
used.
Enter the net mask if DHCP server is not
used.
Enter the gateway address if DHCP server is
not used.
DNS server address (primary) field
Available input characters:
Numeric characters (0–9), period (.)
(Example: 192.168.0.253)
DNS server address (secondary) field
Available input characters:
Numeric characters (0–9), period (.)
(Example: 192.168.0.254)
Enter the port number here. Number 80 is
normally used.
Enter the name of the projector here. Enter
the host name here if it is required when
the DHCP server is going to be used, for
instance.
Button to update settings
ENGLISH – 103