Connection (continued)
Example of connecting with VIDEO devices
Video deck (TBC built-in)
Color monitor
Attention
•
When connecting with a video deck, be sure to use the one with a built-in time base corrector (TBC) or use a
TBC between the projector and the video deck.
•
If nonstandard burst signals are connected, the image may be distorted. If this is the case, connect a TBC
between the projector and the video deck.
Note
•
The DVI-D signal input terminal supports only a single link.
•
The HDMI-DVI-D conversion cable is required to connect an HDMI-compliant device.
•
When using the DVI-D input, EDID settings may be required for the connected device. (pp. 73, 74)
•
It is possible to connect the DVI-D input terminal with an HDMI- or DVI-D-compliant device, but with some
devices the images may not appear or other problems may be encountered in operation.
28 – ENGLISH
Control PC
IN
OUT
REMOTE 1
REMOTE 2 IN
IN
OUT
VIDEO
S-VIDEO IN
Video deck (TBC built-in)
Control PC
RS-232C IN
RS-422 IN
SERIAL
R/P
G/Y
B/P
R
B
SYNC/HD
VD
RGB 1 IN
RGB 2 IN
Red (connected to P
Blue (connected to P
Green (connected to Y terminal)
DVD player
Control PC
RS-422 OUT
LAN
DVI-D IN
terminal)
R
terminal)
B
DVD player with HDMI
(HDCP) terminal