Side-Mounted Connection Terminals - Panasonic PT-D7700 Operating Instructions Manual

Name and function of parts
Side-mounted
connection terminals
S-VIDEO IN terminal (pages 24 and 25)
An input terminal for S-video signals
(MIN4-pin DIN).
This terminal complies with S1 signals and
automatically toggles between 16:9 and 4:3
according to the size of input signals.
VIDEO IN terminal (page 25)
An input terminal for video signals. (BNC)
VIDEO OUT terminal (page 25)
An output terminal (active through) for video
signals. (BNC)
RGB (YP P )1 input terminal (pages 26, 27)
B R
A terminal to input RGB or YP
RGB (YP P )2 input terminal (page 26)
B R
A terminal to input RGB or YP
15-pin female).
14
IN OUT
REMOTE 1 REMOTE 2
S-VIDEO VIDEO
IN OUT R/P
IN
R
P signals (BNC).
B R
P signals (D-SUB
B R
RS-232C (G) / RS-422 (R) RS-232C (G) / RS-422 (R)
IN OUT
SERIAL
RGB 1 IN RGB 2 IN
G/Y B/P SYNC/HD VD
B
REMOTE1 lN/OUT terminal (page 17)
When two or more main units are used in the
system, they can be connected and controlled with
a wired remote control cable (M3 jack).
REMOTE2 terminal (page 84)
The user can remotely control the main unit by
using an external control circuit to this terminal
(D-SUB 9-pin female).
SERIAL IN terminal (pages 25–27, 74, 82, 83)
This terminal is an RS-232C/RS-422 compliant
input terminal (switching necessary) to connect a
PC and to externally control the main unit
(D-SUB 9-pin female).
SERIAL OUT terminal (pages 26, 27, 74, 82, 83)
This terminal is an RS-232C/RS-422 compliant
output terminal (switching necessary) to supply
signals given to the serial input terminal
(D-SUB 9-pin male).