Side-Mounted Connection Terminals - Panasonic PT-D7500E Operating Instructions Manual

Name and function of parts
Side-mounted
connection terminals
S-VIDEO IN terminal (pages 22 and 23)
An input terminal for S-video signals
(MIN4-pin DIN).
This terminal complies with S1 signals and
automatically toggles between 16:9 and 4:3
according to the size of input signals.
VIDEO IN terminal (page 23)
An input terminal for video signals. (BNC)
VIDEO OUT terminal (page 23)
An output terminal (active through) for video
signals. (BNC)
SERIAL IN terminal (pages 23–25, and 75–77)
This terminal is an RS-232C/RS-422 compliant
input terminal (switching necessary) to connect a
PC and to externally control the main unit
(D-SUB 9-pin female).
14
IN OUT
REMOTE 1 REMOTE 2
S-VIDEO VIDEO
IN OUT R/P
IN
R
RS-232C (G) / RS-422 (R) RS-232C (G) / RS-422 (R)
IN OUT
SERIAL
RGB 1 IN RGB 2 IN / RGB 1 OUT
G/Y B/P SYNC/HD VD
B
SERIAL OUT terminal (pages 24, 25, and 75–77)
This terminal is an RS-232C/RS-422 compliant
output terminal (switching necessary) to supply
signals given to the serial input terminal
(D-SUB 9-pin male).
RGB (YP P )1 input terminal (pages 24 and 25)
B R
A terminal to input RGB or YP
RGB (YP P )2 input/RGB (YP
B R
terminal (pages 24, 25)
This terminal (active through) receives RGB or
YP P signals or supplies signals given to the
B R
RGB1 input terminal (D-SUB 15-pin female).
REMOTE2 terminal (page 78)
The user can remotely control the main unit by
using an external control circuit to this terminal
(D-SUB 9-pin female).
REMOTE1 lN/OUT terminal (page 17)
When two or more main units are used in the
system, they can be connected and controlled with
a wired remote control cable (M3 jack).
P signals (BNC).
B R
P )1 output
B R