I Audio Output/Squelch Adjustment - Icom IC-M801E Instruction Manual

I Audio output/squelch adjustment

D D Audio output level
➥ Rotate [VOL] to adjust audio output level.
NOTE: Connect the handset/microphone and
make sure that no "
displayed during audio level adjustment, otherwise,
audio may not be output.
When either or both indicators are displayed, per-
form the following operations;
- When " " is displayed, push [F] then [4
- When " " is displayed, push [F] then [2
D D Squelch function
➥ Push [F] then [2
] to turn the squelch function
SQL
ON and OFF.
• Squelch level adjustment
q Push [F] then [2
] to turn the squelch function
SQL
ON.
• Select the desired frequency/channel in advance, if de-
sired.
w Push [F] then [MODE
mode.
[GRP]
• Voice squelch function
The voice squelch function detects voice components
in the received signal and opens the squelch only
when voice components are included in the signal.
q While pushing [MODE
enter initial set mode.
[CH]
[GRP]
" and " " indicators are
×
].
SP
].
SQL
[F] [2 ]
SQL
] to enter quick set
SET
[F] [MODE ]
SET
[2 ]
SQL
[CH]
] turn the power ON to
SET
[MODE ]
SET
[POWER]
" " appears when the squelch function is ON.
e Rotate [GRP] to select the "S-SQL LEVEL" item.
r Rotate [CH] to adjust the squelch level.
• Adjust the level within 1–100 range.
t Push [MODE
] to exit quick set mode.
SET
w Rotate [GRP] to select the "VOICE SQL" item.
e Rotate [CH] to select the voice squelch function
ON and OFF.
ÇÇ
r Turn the power OFF then ON again to exit initial
set mode.
QUICK REFERENCE
[4 ] [2 ]
×
SP SQL
[F] [VOL]
II