Replace The Dust Filters - Oki IP-7900-26 Operation Manual

Replace the dust filters

„ Check that the suction fan filters are not encrusted with dust.
Inside the Printer, exhaust fan filters also called dust filters are attached to:
- the four air exhaust outlets of the suction fan with the IP-7900-20/21; or
- the three air exhaust outlets of the suction fan with IP-7700-20/21
Replace all the dust filters approximately every three months.
When replacing the dust filters from the operation panel menu, start the procedure from step 1. When replacing
while executing [#START MAINTENANCE], start the procedure in step 6.
You will be prompted to replace the dust filters during the start maintenance guidance after 3 months or 2.5 km
of print length.
1
á R E W I N D F O R M F E E D â
ß P H . R E C
2
# S T A R T M A I N T E N A N C E
>
3
# M A I N T E N A N C E
> S P I T T O O N C A S E / U N I T ?
4
# M A I N T E N A N C E
> S P I T T O O N C A S E / U N I T ?
5
# M A I N T E N A N C E
> D U S T F I L T E R ?
P H . M A I N à
Dust filters
Press the key.
key scroll to [#MAINTENANCE].
With the
Press the key.
Press the key.
Select [DUST FILTER] and press the
key.
77