Load The Ink Extension Chip - Oki IP-7900-26 Operation Manual

Load the ink extension chip

Load the ink extension chip into the Printer. A chip is supplied when you purchase three ink bottles.
This ink extension chip makes it possible to use VX ink continuously.
Loading the ink extension chip into the chip reader.
1
2
3
Removing the ink extension chip from the chip reader.
Remove the chip following the procedure to load the chip in the reverse order.
1
CAUTION
- Be careful not store used chip with the new ones.
122
IP-7900-26/IP-7700-26 Basic Operation Guide
Push
Push
Open the chip reader cover.
CAUTION
- Do not apply excessive force on the cover.
Insert the ink extension chip into the chip
reader.
Insert the chip in the orientation matching that of the
chip reader, otherwise the chip will not be read.
Close the chip reader cover.
Push it until it locks.