Replace a wiper blade
CAUTION
- When the Printer firmware version is 4.20 or later, use an IP7-180 Wiper blade (TYPE S).
The following describes the wiper blade replacement procedure.
Replace the wiper blade when the replacement message appears or scratches are found at a daily inspection.
Prepare the tweezers supplied in the daily maintenance kit before replacing the wiper blade.
1
2
3
Open the front cover and wiping cover.
Using the tweezers, remove the wiper blade.
First pull the bottom of the wiper blade to
release the hook of the plastic projection.
Then pull the wiper blade out from its slot.
125