Procedure To Remove Media Roll From The Printer; Media At Take-Up Side - Oki IP-7900-26 Operation Manual

Procedure to remove media roll from the Printer

Media at take-up side

1
2
3
4
Cutter groove
CAUTION
- A net is spread out on the supply side and take-up side paper guides respectively, so that the media will not adhere to
the guides. Do not remove these nets.
- When cutting the media, be careful not to damage the paper guide net.
- Pay attention not to drop the printed media to avoid smearing the media.
Turn off the take-up direction switch.
Take-up direction switch
OFF
OFF
Open the tension bar guide's cover.
Place the take-up side tension bar at the
tension bar hook.
Open the front cover, and then cut the media.
You are recommended to cut the media by setting the
cutter blade along the cutter groove.
Cutter
Media
Cutter groove
Platen
Cutter guide
Sponge
49