Attach the support sheet
1
ⓐ
ⓒ
ⓓ
Attach the head cleaning sheet
2
ⓐ
ⓒ
ⓓ
3
Hook two holes of the support sheet to the cleaning
sheet mount attachment locations (a) and (b). Keep
the sheet stretched and hook the two remaining holes
to the attachment locations (c) and (d).
ⓑ
Place the head cleaning sheet on top of the support
sheet. Hook two holes to the attachment locations
(a) and (b) and then the two others holes to the
attachment locations (c) and (d).
ⓑ
Remove all wrinkles on the head cleaning sheet by
lightly pulling both sides of the sheet top edge in the
direction of the arrows. This will prevent the sheet from
rising near the bottom edge attachment locations.
99