Introduction; Appearance / Main Components And Their Functions; Printer Rear (Supply Side) - Oki IP-7900-26 Operation Manual

Introduction

Appearance / Main components and their functions

Printer front (take-up side)
Front cover
Must be closed during printing.
Wiping cover
Opened when replacing the wiper
blade.
Bulk ink system
A unit to set a bulk ink
Sensor lever
Used as a replacement for the ink
box cover. Manipulate the lever
when prompted to open or close
the ink cover during
guidance.Refer to Introduction for
details.

Printer rear (supply side)

Front cover
Must be closed during printing.
Wiping cover
Opened when replacing the wiper
blade.
Bulk ink system
A unit to set a bulk ink
Sensor lever
Used as a replacement for the ink
box cover. Manipulate the lever
when prompted to open or close
the ink cover during
guidance.Refer to Introduction for
details.
20
IP-7900-26/IP-7700-26 Basic Operation Guide
Protection bar
Placed to protect media surface
just after the print.
Tension bar
Placed to apply a proper tension to
media.
Tension bar guide
Applies tension to the media.
Protection bar
Placed to protect media surface
just after the print.
Tension bar guide
Applies tension to the media.
Caster
Unlocked to move the Printer and
locked to immobilize it.
Media drying fan
Equipped to dry ink after printing.
Take-up direction switch
Selects a media take-up direction.
Media advance/rewind switch
Advances or rewinds media.
Media drying fan
Equipped to dry ink after printing.
Take-up direction switch
Selects a media take-up direction.
Media advance/rewind switch
Advances or rewinds media.
Operation panel
Provided with LEDS and LCD to
display printer status and keys to
set functions.
Capping cover
Opened when cleaning the
capping unit or the carriage.
Pressure control knob
Switches the media pressure force.
Scroller
A shaft to feed or wind media
Operation panel
Provided with LEDS and LCD to
display printer status and keys to
set functions.
Capping cover
Opened when cleaning the
capping unit or the carriage.
Pressure control knob
Switches the media pressure force.
Tension bar
Placed to apply a proper tension to
media.