Oki IP-7900-26 Operation Manual page 92

4
5
6
CAUTION
- Be careful so that the cap cleaning liquid does not
adhere to any part other than the cap.
7
The missing dots persist even after the cap cleaning...
- If you still see the missing dots even after the cap cleaning above, while checking visually remove foreign
matters and ink stains from the cap with a cleaning swab dampened with cap cleaning liquid.
92
IP-7900-26/IP-7700-26 Basic Operation Guide
Open the front cover and then open the
capping cover.
Soak the cleaning roller in the cap cleaning
liquid.
TIP
- To prevent the cap cleaning liquid
contaminated, in the cap cleaning liquid bottle
do not soak the cleaning roller after you clean
the cap with it.
Clean the top surface of the cap by rolling the
cleaning roller.
(1) Roll the roller back and forth on each cap.
(2) Then roll the roller back and forth 10 times on each cap.
TIP
- The cleaning roller is intended for a single
use only. Use a new cleaning roller for each
cleaning.
Close the capping cover and the front cover.
The print head returns automatically to the home
position.
CAUTION
- Be sure to unlock the stopper before closing the capping
cover. If you try to close the capping cover without
unlocking the stopper, the stopper may bend, or the bent
stopper may touch the carriage, which may damage the
Printer.