Table of Contents
Advertisement
Environmental conditions
¢ Operating temperature and humidity levels
Use the Printer within the temperature and humidity levels shown below.
Temperature: 15°C to 30°C (60°F to 80°F)
Humidity: 30% to 70%
¯ To obtain better print quality, use the Printer within a temperature range of 20 to 25°C (68 to 77°F).
The print speed may decrease when the temperature is below 20°C.
¯ To ensure a stable and good print quality, the Printer slows down the print speed when the head
temperature exceeds 40°C (104°F).
NOTE
- If the Printer is not used at the operating temperature and humidity ranges, the print may be stopped or the print quality may be
degraded.
- It takes time for the Printer to reach the operating environment temperature and humidity.
- To ensure good print image quality, it is recommended to keep the room temperature 20 to 25°C, 68 to 77°F and use the Printer
after 1 hour.
¢ Places where the Printer must not be installed
Do not install the Printer in the following places.
¯ Places near fire
¯ Places exposed to direct sunlight
¯ Places subject to vibration
¯ Places with excessive dust
¯ Places subject to extreme changes in temperature or humidity
¯ Places near an air conditioner or a heater
¯ Places where the Printer may get wet
¯ Places exposed to direct exhaust air from an air vent
¯ Places near a diazo copier that may generate ammonia gas
¯ Places with poor ventilation
¯ Unstable places
19
Advertisement
Table of Contents
