Move The Printer - Oki IP-7900-26 Operation Manual

Move the Printer

If you wish to move the printer several meters on the same site, across a horizontal floor with no steps and no
slopes, see the following instructions.
For more difficult movement, contact your service representative.
1
Remove the media from the Printer.
2
Turn off the Printer.
3
Before the movement, loosen and raise the adjustment leveling feet so that the wheels touch the ground.
4
Push the printer to the preferred position.
5
After the movement, lower and tighten the adjustment leveling feet.
CAUTION
- Do not move the Printer with a media roll attached, or the heavy media may damage the Printer.
- Be sure to loosen and raise the adjustment leveling feet before movement, and lower and tighten them after movement.
- Move the Printer carefully so that the adjustment leveling feet would not hit against any obstructions.
„ Bulk ink system
CAUTION
- Remove the ink trays from the ink box, and move the Printer and the bulk ink system separately.
- Do not forget to unlock the casters to move the system.
- Be sure to lock the caster after the system has been moved.
Caster lock
Adjustable leveling feet
115