Replace An Ink Cartridge - Oki IP-5630 User Manual

Replace an ink cartridge

This section describes the reloadable cartridge replacement procedure.
Consumables
For details about reloadable cartridge names and types,
Upper plate
Cartridge assembly
Notes
‹ Check that the colors and types indicated on the ink cartridge tail section's color identification label and the board's color
identification label are the same.
‹ Usually a small quantity of ink remains in the used ink cartridge removed from the cartridge holder. This is normal.
‹ Always replace the board together with the used ink cartridge.
‹ Once an ink cartridge has been set to a cartridge holder, do not remove it until the ink has been entirely used. If a cartridge
that still contains ink is removed and inserted again, ink end may not be detected correctly.
‹ To temporarily put aside an ink cartridge that still contains ink, store it using the cartridge holder IP5-320 (sold separately)
without removing it from the holder.
202
Advanced operations
Spout
Ink cartridge for cartridge holder
Cartridge holder cover
Tail section fixing plate
page 260 Consumables.
Color identification label
(ink cartridge back)
Color identification label
Tail section
Lower plate
Board protective sheet
Board
Cartridge holder