Oki IP-7900-26 Operation Manual page 126

4
CAUTION
- When handling the wiper blade, do not touch its upper part by hand or nip it
with tweezers because the upper part directly contacts with the print head.
5
126
IP-7900-26/IP-7700-26 Basic Operation Guide
Install a new wiper blade.
Nip the rubber of the new wiper blade with the
tweezers and insert it straight downward, and install
it by hooking the hole in the rubber to the plastic
projection.
Check that the wiper blade's two positions circled in
the figure below are installed correctly as the figure
shows.
Close the wiping cover and then close the front
cover.
CAUTION
- Be sure to unlock the stopper before closing the
wiping cover. If you try to close the wiping cover
without unlocking the stopper, the stopper may bend,
or the bent stopper may touch the carriage, which
may damage the Printer.
Rubber part
Upper part