Table of Contents
Advertisement
Sheet mount cleaning
Check the cleanliness of the print heads nozzle surfaces. If dirty, clean them using sheet mount cleaning.
You will be prompted to perform cleaning after one month or 0.6 km of print length.
CAUTION
-
Do not wipe the print heads nozzle surfaces with a cleaning swab as it may cause print head malfunction.
„ Preparation when using a head cleaning set for the first time
Install the two screws supplied with the head cleaning set to the Printer. (Two more spare screws are also
supplied.)
„ Prepare the sheet cleaning part
Head cleaning part components
Cleaning sheet mount x1
98
IP-7900-26/IP-7700-26 Basic Operation Guide
Screw installation
- The screws need to be installed only once.
(There is no need to remove them afterward.)
Support sheet x1
Head cleaning sheet x1
Advertisement
Table of Contents
