Oki IP-7900-26 Operation Manual page 100

Apply wiper cleaning liquid
4
100
IP-7900-26/IP-7700-26 Basic Operation Guide
Apply 4 cc of wiper cleaning liquid on the head
cleaning sheet surface using a dropper. Apply 1 cc four
times as follows.
Apply 1 cc of liquid to each of the (1), (2) and (3) areas
shown in the figure to the left (3 cc in total).
Apply the liquid drop by drop to make sure it spreads
evenly on each area.
Apply only the suitable amount
− Do not apply too much wiper cleaning liquid.
The cleaning effect will not change even if
applying more wiper cleaning liquid than
indicated.
After applying liquid on zone (1)
After applying liquid on zone (2)
After applying liquid on zone (3)
At the end, apply the last 1 cc to fill the empty spaces.
About the wiper cleaning liquid
- The cleaning liquid is shown in pink in the
figures on the left to make the operation easier
to understand. The actual wiper cleaning liquid
is transparent.