Precautions To Prevent Media Jams - Oki IP-7900-26 Operation Manual

Precautions to prevent media jams / Basic operation for printing / Procedure to remove media roll from the Printer / To print
on other media / To perform double-sided printing
Skew
Set the tension bar at the media center.
Media
NO
At xing media to the take-up paper tube,
Stick the adhesive tape from center outward.
NO
The tape is stuck from media edge.
垂直
① ②
Paper tube
At attaching media to the take-up paper tube,
Be sure to set the media perpendicular to the take-up paper tube.
If the media is not perpendicular to the paper tube, the media is taken up with skew, which may cause the
media wave on the platen.
NO
Media
Paper tube
At taking up media in LOOSE winding mode
With IP-7900
Be sure to take up media with paper
tube flange.
Without paper tube flange, winding
deviation may cause a media jam.
If media skews, the media edge is disengaged
from the media edge guard, which may cause
the media wave.
Tension bar
Media
③ ④ ⑤
Tape
Perpendicular
Tape
Paper tube ange
Media edge guard
Media
YES
Media
YES
The tape is stuck from center outward.
垂直
④ ② ①
Paper tube
Tape
YES
Media
Paper tube
Tape
With IP-7700
At the both media supply side and
media take-up side, without a flange
spacer, fix the scroller flange to the
media by pressing it as far as it goes.
[Viewed from top]
Media
Tension bar
③ ⑤
Perpendicular
Flange spacer
29