Modular Redundancy System (Optional); Dji Zenmuse X3 Gimbal With Camera - dji MATRICE 600 User Manual

Modular Redundancy System (Optional)

The A3 flight control system built into the Matrice 600 can be upgraded to the A3 Pro by installing two
upgrade kits. Refer to the A3/A3 Pro User Manual for installation and usage. After installation, be sure
to connect the Matrice 600 to the DJI Assistant 2 to configure the modular redundancy system.

DJI Zenmuse X3 Gimbal with Camera

Camera
Camera Profile
The X3 gimbal camera can record up to 4K 4096x2160p video at 24 fps, and capture 12-megapixel
images. It features a 1/2.3" Sony EXMOR CMOS image sensor. Preview of the camera's POV in the
DJI GO app before shooting images and video. Have extra options to shoot stills in burst mode or
self-timer mode, and export video in either MOV or MP4 format.
Camera Micro SD Card Slot
To store your photos and videos, plug in the Micro SD card into the Micro SD card slot on the gimbal
before powering on the Matrice 600. The camera supports a single Micro SD card of up to 64GB. A
UHS-1 type Micro SD card is recommended because of its fast read and write capability, allowing you
to store high-resolution video files.
DO NOT remove the Micro SD card from the gimbal when it is powered on.
Camera Data Port
Power on the Matrice 600 and then connect a USB cable to the Camera Data Port to download photos
or videos from the camera to your PC.
Power on the aircraft before downloading the files.
MATRICE 600 User Manual
©
2016 DJI All Rights Reserved.
67