Mounting The Upper And Lower Covers Of The Center Frame - dji MATRICE 600 User Manual

4. Plug the GPS cable into the CAN1 port on the flight controller.
5. Attach the CAN HUB of the GPS module onto the upper plate of the center frame. Then insert the
GPS cable into the slot on the upper plate of the center frame.
6. Fix the GPS cable onto the extension rod using tape.
Mount the GPS with an extension rod to avoid interference from power system.
Ensure the extension rod is firm and stable before each flight.
Avoid catching your fingers in the collapsible mount when folding for transportation.

Mounting the Upper and Lower Covers of the Center Frame

1. Connect the fan cable (with a JST 4-pin connector) to the fan port on the upper cover first, and then
re-mount the upper cover. Make sure the arrow on it is pointing toward the front of the aircraft (M1,
M2) and DO NOT damage the cables. Insert the upper cover into the slots on the upper plate. Be
sure you hear audible clicks, which indicate a proper lock.
DO NOT damage the fan cable when removing the upper cover of the center frame.
Slot
CAN HUB
CAN1 Port
GPS Cable
Fan Cable
Fan
Upper Cover
MATRICE 600 User Manual
Aircraft's Front
©
2016 DJI All Rights Reserved.
13