Using The Batteries - dji MATRICE 600 User Manual

MATRICE 600 User Manual

Using the Batteries

Installing the Batteries
There are six battery compartments on the Matrice 600. You must load all six battery
compartments with batteries of the same model before each flight.
Make sure all the batteries are fully charged before each flight.
Never insert the Intelligent Flight Battery into or remove it from the battery compartment of
the Matrice 600 when it is powered on.
If using more than six batteries, you can mark them separately (six batteries for one set) with
the battery stickers that come with the Matrice 600.
Insert the six Intelligent Flight Batteries into the battery compartments.
Powering ON/OFF
Powering On: Press the Power Button once, then press again and hold for 2 seconds to power on.
The Power LED will turn red and the Battery Level Indicators will display the current
battery level.
The Matrice 600 has six Intelligent Flight Batteries and an advanced battery management system.
When you power on one of the batteries, the battery management system will automatically assess
the power level for all of the other batteries. If the power supply is OK, the other batteries will power on
automatically. Likewise, you only need to power off one battery and all the other batteries will power
off automatically.
DO NOT manually power on more than one Intelligent Flight Battery to avoid damaging the
batteries.
16
©
2016 DJI All Rights Reserved.
LED4
LED2
Power Button (Built-in LED)
LED3
LED1