Installation; Mounting The Frame Arms - dji MATRICE 600 User Manual

Hide thumbs Also See for MATRICE 600:

Table of Contents

Installation

Tools Required: 1.5 mm hex key, 2.0 mm hex key, 2.5 mm hex key, medium strength threadlocker.

The frame arm cables come with heat shrink tubing for easy wiring. Remove the tubing from

the cables just before connecting the cables.

Propeller Cover

Motor

1. Preparing the frame arms.

a. Check for cracks on all propellers. Ensure all the screws are secured in position.

b. Ensure all motors are mounted correctly and firmly and are free from obstruction.

c. Mount the arms with red motor bases to the M1 and M2 positions (on both sides of battery

compartment No. 1) to indicate the nose direction of the Matrice 600. When viewed from above

with battery compartment No. 1 facing forward, the M1 position is on the right side of battery

compartment No. 1, and the M2 - M6 positions are arranged counter-clockwise from M1.

d. Identify the "CW" and "CCW" marks on the propellers. Mount the frame arms marked "CCW" to

the M1, M3 and M5 positions of the center frame. Mount the arms marked "CW" to the M2, M4

and M6 positions of the center frame.

Propeller

CW or CCW Mark

Arm Screws

Front / Rear Indicator

Propeller Holder

Arm Tube

Aircraft's Front

ESC Signal Cable

Power Cables

Screw Holes

Table of Contents

Show Quick Links

Table of Contents