Calibrating The Compass - dji MATRICE 600 User Manual

Warning
Blinking Yellow Rapidly
Blinking Red Slowly
Blinking Red Rapidly
Blinking Red Rapidly for 0.6 second when
performing CSC
—— Solid Red
Blinking Red and Yellow Alternatively

Calibrating the Compass

Be sure to calibrate the compass before your first flight, or else the aircraft cannot work properly. After
that, calibrate the compass when the DJI GO app or the Aircraft Status Indicator prompts you to do so.
DO NOT calibrate your compass where there is a chance of strong magnetic interference,
such as magnetite quarries, parking structures, and underground steel reinforcements.
DO NOT carry ferromagnetic objects such as cellular phones with you during calibration.
Calibration Procedures
Choose an open space to carry out the following procedures.
1. Tap the System Status bar in the app and select Calibrate, then follow the on-screen instructions to
calibrate the aircraft step-by-step.
2. Hold the aircraft horizontally, and rotate it 360 degrees along the central axis. The Aircraft Status
Indicator will emit a solid green light.
3. Hold the aircraft vertically with its nose pointing downwards, and rotate it 360 degrees around its
central axis.
4. Recalibrate the compass if the Aircraft Status Indicator blinks red.
Calibrate the compass after you launch the DJI GO app if you are prompted to do so.
After successful calibration, the compass may become abnormal and the DJI GO app will
prompt you to recalibrate the compass when you place the aircraft on the ground. Move the
aircraft to another location.
The DJI GO app will prompt you to resolve the compass issue if the compass is affected by
strong interference after calibration is complete. Follow the prompted instructions to resolve
the compass issue.
MATRICE 600 User Manual
Remote controller signal lost
Low battery warning
Critically low battery warning
Large IMU bias or IMU initialization
Critical error, contact DJI Support
Compass calibration required
©
2016 DJI All Rights Reserved.
47