Mounting The Expansion Bays (Optional) - dji MATRICE 600 User Manual

MATRICE 600 User Manual

Mounting the Expansion Bays (Optional)

Extend the center frame of the Matrice 600 with the expansion bays to mount your own devices.
Mounting the Upper Expansion Bay
1. Remove the four sets of triangularly arranged M3x5.5 screws (twelve screws in total).
2. Mount the four brackets of the expansion bay to the upper plate of the center frame by inserting
and tightening twelve M3×8 screws.
3. Mount the base plate of the expansion bay to the brackets by inserting and tightening eight
M3×5.5 screw.
66
©
2016 DJI All Rights Reserved.