3. Run the firmware update program. Press the update button and wait for the process to finish.
4. The Charging Hub will automatically restart when the update has been successfully completed.
5. Repeat this process if the firmware upgrade fails for any reason.
Specifications
Compatible Battery Charger
Compatible Battery Models
Operating Temperature
Operating Voltage
Weight
Retractable Landing Gear
Recalibrating Servo Travel
R
To right servo
To left servo
To the servo cable at the bottom of
Keep your hands away from all moving parts to avoid injuries.
Instructions:
1. Be sure to remove the two springs on the landing gear, or else calibration may fail.
2. Ensure that the "R", "L" and "IN" connections are correct.
3. Keep the whole aircraft off of the ground during calibration, as landing gear will move.
Matrice 600 Standard Charger (A14-100P1A)
TB47S Intelligent Flight Battery
TB48S Intelligent Flight Battery
14 °F to 104 °F (5 °C to 40 °C)
26.3 V
440 g
L IN
the center frame
SET Button
LED
Connecting Arm
MATRICE 600 User Manual
©
2016 DJI All Rights Reserved.
57