Preparing Phantom 2 Vision+ Aircraft; Introduction; Built In Flight Control System Instructions - dji PHANTOM 2 VISION+ User Manual

3Preparing PHANTOM 2 VISION+ Aircraft

PHANTOM 2 VISION+ aircraft is a quadrotor with built-in flight control system and has integrated with gimbal
and camera, it also has a Micro-USB port on the aircraft for connecting to Assistant Software and
anotherMicro-USB port on the gimbal for connectingMicro-SD cardof camera. The aircraft has battery
compartment specialized for the intelligent battery, it also has LED flight indicators for status indicating. All these
features make the PHANTOM 2 VISION+ easy to assemble and configure.

3.1Introduction

[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[11]
[12]
[13]
[14]
3.2 Built-in Flight Control System Instructions
PHANTOM 2 VISION+ is equipped with DJI Naza-M V2 flight control system which helps to improve operability
and stability. With the flight control system, users can control the entire aircraft's functions in flight such as Pitch
(forwards and backwards), Roll (left and right), Elevator (up and down) and Yaw (turn left or right). When the
aircraft enters the IOC, failsafe or low battery capacitymode, the flight control system will navigate the aircraft to
ensure flight stability and safe.
©2014 DJI Innovations. All Rights Reserved.
[9]
[10]
[15]
[16]
[17]
22 |
[1] Propeller
[2] Motor
[3] Nose Sticker
[4] Nose LED
[5] FC Assistant Port(Micro-USB port)
[6] Vibration Absorber
[7] Camera LED Indicator
[8] Camera Function Button
[9] Triaxial Gimbal
[10] Camera Lens
[11] Rear LED
[12] DJISmart Battery
[13] Receiver Antenna
[14] Landing Gear
[15] Camera Data Port(Micro-USB port)
[16] Compass
[17] Micro-SD Slot