Mounting The Gimbal (Optional) - dji MATRICE 600 User Manual

MATRICE 600 User Manual
2. Arrange the cables connected to the lower plate of the center frame. Pull the XT30 power cable on
the lower plate through the LIPO-6S cable outlet on the lower cover, align the reserved XT30 port on
the lower plate to the DC-18V cable outlet on the lower cover of the center frame, and then re-mount
the lower cover of the center frame. DO NOT damage the cables. Insert the lower cover into the
slots on the lower plate, making sure you hear audible clicks indicating a proper lock.
3. Connect the power cable of the retractable module to the XT30 power cable at the bottom of the
center frame.

Mounting the Gimbal (Optional)

The built-in flight control system of the Matrice 600 is compatible with the following DJI gimbals and
cameras.
Ronin-MX
Zenmuse X3
Zenmuse X5 Series
Zenmuse XT
Zenmuse Z15 Series HD Gimbal: Z15-A7, Z15-BMPCC, Z15-5D III, Z15-GH4
Different accessories are used to mount different gimbals or cameras. Purchase corresponding
accessories according to your needs. Refer to Appendix (p. 62) for details on mounting the gimbal.
Refer to DJI Zenmuse X3 Gimbal with Camera (p. 67) for gimbal movement control for all the gimbals
above.
14
©
2016 DJI All Rights Reserved.