Aircraft; Flight Modes; Vision System And Infrared Sensing System - dji MATRICE 30 Series User Manual

Aircraft

The Matrice 30 Series Dock Version aircraft mainly consists of the flight control system,
communication system, vision system, image processing system, propulsion system, and
power and battery system. This chapter describes the functions of these components.
The aircraft is already linked to the dock when purchased in the Matrice 30 Series Dock
Bundle. Otherwise, follow the instructions to link the aircraft to the dock (the firmware of
both the dock and the aircraft should be updated to the latest firmware version):
1. Open the electrical cabinet door using the triangular key.
2. Press the dock cover manual release button five times, and then press and hold the
power button on the aircraft for five seconds or more. During the linking process, the
dock cover status indicators will blink blue, and short beeps will sound from the dock.
3. When the linking process is successful, the dock status indicators will blink white.
• The dock can also be linked to the aircraft using the remote controller, refer to
the Installation and Setup Manual for more information.

Flight Modes

Matrice 30 Series Dock Version aircraft flies in N mode (Normal) by default. In N mode,
the aircraft utilizes the GNSS and the vision system six-directional obstacle sensing to
stabilize itself automatically. When obstacle sensing is enabled and the lighting and other
environment conditions are sufficient, the maximum tilt angle of the aircraft will be 25°.

Vision System and Infrared Sensing System

Rear View Bottom View
©
2023 DJI All Rights Reserved.
39