Mounting Gps Module - dji MATRICE 600 User Manual

MATRICE 600 User Manual
6. Connect both springs to the legs and the center frame.
Watch your fingers when mounting the springs to the landing
gear.
DO NOT move the spring mount on the landing gear leg to
avoid affecting flight performance.

Mounting GPS Module

1. Remove the upper cover of the center frame.
2. Remove the two M3×5.5 screws on the left of the upper plate. Attach the collapsible GPS mount
using two M3×8 screws.
3. Mount a GPS module to the GPS mount with an extension rod. Ensure the arrow points toward the
front of the aircraft (M1, M2). Insert two M2x4 screws into the two connectors above and under the
extension rod.
Aircraft's Front
12
©
2016 DJI All Rights Reserved.
Aircraft's Front