Charging Hub For Intelligent Flight Batteries - dji MATRICE 600 User Manual

Hide thumbs Also See for MATRICE 600:
Table of Contents

Advertisement

b. It will take approximately 25 minutes to complete the firmware upgrade. The gimbal will repeat a
beeping pattern of four fast beeps to indicate that the upgrade is in progress, and emit one slow
beep followed by two fast beeps to indicate that the upgrade has been completed successfully.
c. Check the upgrade status by opening the .txt file that is automatically generated after the upgrade.
You should see the text "result: successful" in the .txt file if the upgrade is successful. Otherwise,
try upgrading the firmware again if you see the text "result: failed" in the text file or the gimbal
sounds a long beeping sound.
Ensure that there is only one version of update file in the Micro SD card, or else there will be
an update error.

Charging Hub for Intelligent Flight Batteries

The Matrice 600 is shipped with two Charging Hubs. When used with the Matrice 600 Battery Charger,
it can charge up to four Intelligent Flight Batteries. The Intelligent Flight Batteries will be charged
in sequence according to their power levels, from high to low. The Micro USB port allows users to
update the firmware.
Warning
1. The Charging Hub is only compatible with the Matrice 600 Battery Charger. Do not attempt to use
the Charging Hub with any other battery charger.
2. The Charging Hub is only compatible with TB47S and TB48S Intelligent Flight Batteries. Do not
attempt to use the Charging Hub with other battery models.
3. Place the Charging Hub on a flat and stable surface when in use. Ensure the device is properly
insulated to prevent fire hazards.
4. Do not attempt to touch or expose the metal terminals on the Charging Hub.
5. Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup.
Overview
[3]
[5]
[6]
[9]
[1] Charging Port 1
[2] Status LED 1
[3] Charging Port 2
[4] Status LED 2
[4]
[2]
[1]
[7]
[8]
[5] Charging Port 3
[6] Status LED 3
[7] Charging Port 4
[8] Status LED 4
MATRICE 600 User Manual
[10]
[9] Power Port
[10] Firmware Update Port
(Micro USB Slot)
©
2016 DJI All Rights Reserved.
55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents