Flight Status Indicators - dji MATRICE 600 User Manual

Hide thumbs Also See for MATRICE 600:

Table of Contents

MATRICE 600 User Manual

5. The DJI GO app is connected to the aircraft.

6. Motors start properly and are functioning as normal.

Flight Status Indicators

Front/Rear LEDs

There is a Front/Rear LED on each frame arm of the Matrice 600 to show the orientation of the aircraft

after motors started. The Front LEDs are red and located on frame arms M1 and M2. The Rear LEDs

are green and located on frame arms M3 to M6.

Aircraft Status Indicator

The Aircraft Status Indicator shows the system status of the flight controller. Refer to the table below

for more information about the Aircraft Status Indicator:

Normal

Blinking Red, Green and Yellow Alternatively

×4 Blinking Yellow Four Times

Blinking Green Slowly

Blinking Yellow Slowly

Blinking Yellow

(Alternates with other flight mode and D-RTK patterns)

Blinking Blue (Alternates with flight mode patterns)

Blinking Blue Rapidly for 1.5 seconds

Aircraft Status Indicator

Power on and self-check

Aircraft warming up

Safe to Fly (P-mode with GPS)

Safe to Fly (No GPS)

Intelligent Flight Mode

Using D-RTK GNSS

Switching devices (IMU or GPS

modules) for the modular redundancy

system

Front/Rear LEDs

Table of Contents

Show Quick Links

Table of Contents